This page covers the VT150D: an oil free compressor on a 50 litre vertical receiver with integral dryer and aftercooler. Check that its duty cycle and FAD meet the site’s demand.
BAMBI VT150D
Original price was: £2,898.00.£2,020.60Current price is: £2,020.60.
The Bambi VT150D is an oil free piston air compressor with a 50 litre vertical receiver, integrated dryer and aftercooler. It is designed for applications that need a clean, dry compressed air supply.
Its 1.1 kW motor delivers 125 L/min free air delivery at 5 bar, with a maximum pressure of 8 bar. Check the air demand and minimum working pressure of your equipment before selecting a model.
- 1.1 kW / 1.5 HP motor
- 125 L/min free air delivery at 5 bar
- 8 bar maximum pressure
- Oil free piston compressor
- 50 litre vertical receiver
- Integrated dryer and aftercooler
- 220–240 V single phase supply; confirm the ordered configuration
BAMBI VT150D Oil Free Air Compressor
The Bambi VT150D is part of Bambi’s VT oil free piston range. It combines a vertical 50 litre air receiver with an integrated dryer and aftercooler for applications where moisture and compressor oil in the air supply matter.
The 1.1 kW motor provides 125 L/min free air delivery at 5 bar and 98 L/min at 8 bar, according to Bambi’s current product data. The maximum working pressure is 8 bar. Output must be checked at the pressure the application actually needs.
The VT150D is a compact choice for suitable dental, laboratory, food and beverage, and precision pneumatic applications. Confirm required air quality, flow, pressure, duty cycle and any additional filtration with CJS Direct before ordering.
Request a quote from CJS Direct to confirm specification, availability and installation requirements.
Who Is The Bambi VT150D Best For?
The VT150D suits intermittent applications that need oil free, dry compressed air within its rated flow and pressure. Bambi specifies a maximum 50% duty cycle; size the system against actual demand rather than assuming continuous output.
Potential applications include:
- Dental equipment, subject to practice demand and air quality requirements
- Laboratory instruments and sampling equipment
- Food and beverage equipment where suitable air treatment is confirmed
- Precision pneumatic controls
- Drink dispensing systems
- Clean air tasks in small facilities
- Replacement of a suitably sized oil free compressor
- Sites needing a 50 litre receiver and integral dryer
For example, a small facility with intermittent compressed air demand may benefit from the integrated dryer. Check simultaneous equipment use and the required free air delivery at operating pressure before recommending this model.
If the built-in dryer is unnecessary, compare the VT150. If lower noise is a priority, Bambi identifies the VTS150D as an alternative. Confirm each model’s receiver size, output and noise level separately.
Key Benefits Of The Bambi VT150D
Oil free compressed air
The oil free pump avoids introducing compressor oil into the air stream. Specify downstream air treatment against the actual air quality standard required by the application.
Compact vertical receiver
The integrated 50 litre vertical receiver combines storage and compressor in a practical footprint. Allow space for airflow, servicing and safe access.
Integrated drying
The VT150D includes an aftercooler and dryer to reduce moisture. Bambi describes a pressure dew point as low as −40°C under specified conditions; verify the required air quality and operating duty.
Soft start protection
The VT range uses a soft start solenoid arrangement to relieve pump pressure when the motor stops, helping protect against restart under load.
Defined output at working pressure
Bambi publishes free air delivery across working pressures, including 125 L/min at 5 bar and 98 L/min at 8 bar. Use the value at the pressure required by the equipment.
Built-in receiver and dryer
The VT150D combines compressor, 50 litre receiver, aftercooler and dryer in one configuration. This can simplify specification where those components are needed.
Bambi VT150D Technical Specifications
| Specification | Bambi VT150D |
|---|---|
| Compressor type | Oil free piston |
| Design | Vertical receiver with integrated dryer and aftercooler |
| Motor power | 1.1 kW / 1.5 HP |
| FAD at 5 bar | 125 L/min |
| FAD at 8 bar | 98 L/min |
| Maximum pressure | 8 bar |
| Receiver | 50 litres |
| Duty cycle | Maximum 50% |
| Dryer | Integrated desiccant dryer with aftercooler |
| Noise level | 78 dB(A), manufacturer current listing |
| Supply | 240 V single phase; confirm configuration |
| Current | 7 A, manufacturer current listing |
| Weight | 51 kg |
| Dimensions (H × W × D) | 87 × 52 × 49 cm |
| Connection | UK plug on listed 240 V configuration |
| Other option | VT150 without dryer; VTH and VTS alternatives by enquiry |
Use Bambi’s latest model data and CJS Direct’s final quotation to confirm the ordered voltage, fittings, dryer performance, warranty and installation details. FAD figures are measured at stated working pressures; do not confuse them with displacement.
VT Range Options And Configuration
The VT150 uses the same motor and receiver size but is supplied without the integrated dryer and aftercooler. Choose air treatment to suit the application.
Bambi identifies a horizontal tank version as a bespoke VTH option where the vertical arrangement does not suit the available space. Confirm dimensions and lead time before quoting.
Bambi points to the VTS150D for buyers prioritising lower noise. Its receiver and dimensions differ from the VT150D, so compare the complete specification.
Depending on the process, extra filtration or treatment may be required. Agree the air quality target, maintenance schedule and any regulatory requirements before specifying equipment.
VT150D Vs VT150
Choose the VT150D where integrated drying and an aftercooler are needed alongside oil free compression. Check the required pressure dew point and operating conditions.
The VT150 is the version without the integrated dryer and aftercooler. It may suit systems with separate air treatment or uses that do not need this integrated package.
| Choose VT150D if | Consider VT150 if |
|---|---|
| An integrated dryer is required | A separate dryer is already in place |
| An aftercooler is required | Integrated drying is not required |
| The 50 litre vertical receiver suits the site | The same vertical receiver size suits the site |
| The application needs dry, oil free air | Air treatment will be specified separately |
| Its FAD and duty cycle meet measured demand | Its FAD and duty cycle meet measured demand |
Both models need to be sized by free air delivery at the application’s minimum pressure and the manufacturer’s duty cycle. For a quieter model, compare the separate VTS range.
Common Applications of the BAMBI VT150D
Dental equipment
The oil free compressor and integrated dryer may support suitable dental equipment. Confirm simultaneous demand, air quality specifications and any practice-specific requirements.
Scientific laboratories
Laboratory instruments can need dry, oil free air. Verify pressure, flow, filtration and the instrument manufacturer’s air specification.
Food and beverage equipment
The VT150D can be considered for relevant packaging or drink dispensing tasks, subject to the required air quality and compliance checks.
Pneumatic controls
Its compact package can serve low demand pneumatic controls where pressure and duty cycle are within the model’s limits.
Precision equipment
Air supplies for precision processes should be checked for moisture, particulates, flow stability and required pressure.
Small clean air systems
The integrated receiver and dryer can be practical for an appropriately sized system with intermittent air use.
Installation, Servicing And Support
The VT150D should be selected as part of an appropriately specified compressed air system. CJS Direct can help check the application against Bambi’s current instructions.
Before ordering, review:
- Required FAD at the equipment’s minimum pressure
- Simultaneous equipment demand and operating pattern
- Single phase electrical supply and plug arrangement
- Ventilation, position and service access
- Receiver capacity and PSSR considerations
- Required dryer performance and filtration
- Pipework and connection requirements
- Air quality specifications
- Installation access and condensate handling
- Service intervals and warranty conditions
Bambi lists a 50% maximum duty cycle for the VT range. A 50 litre, 8 bar receiver should also be assessed for applicable pressure system obligations; CJS Direct can advise on the site’s installation.
Planned service should follow Bambi’s current handbook, including relevant pump, filter and dryer consumables. The dryer’s desiccant and filter may need replacement on the manufacturer’s schedule.
CJS Direct provides compressed air servicing and maintenance support. Ask the team to confirm the service approach and parts for this specific Bambi configuration.
Why Buy Bambi Compressors From CJS Direct?
Bambi’s VT range is built around oil free piston compression for applications needing clean air. The VT150D adds an integrated dryer and aftercooler to the 50 litre receiver package.
The VT150D provides 125 L/min FAD at 5 bar. Buyers should select it using pressure-specific airflow, operating duty and required air quality rather than motor power alone.
CJS Direct can discuss compressed air equipment, air treatment, installation and servicing, helping buyers confirm whether the VT150D fits their site.
If the site needs a different receiver arrangement, a model without dryer or a quieter option, ask CJS Direct to compare the relevant Bambi variants.
Bambi VT150D FAQs
The VT150D is a 1.1 kW oil free piston compressor with a 50 litre vertical receiver, integrated dryer and aftercooler.
Bambi lists 125 L/min free air delivery at 5 bar and 98 L/min at 8 bar. Use the figure at the working pressure required by the equipment.
Yes. The D model includes a dryer and aftercooler. The VT150 is the corresponding option without these integrated components.
Bambi’s current VT150D product listing gives 78 dB(A). Consider placement and acoustic needs; for a quieter alternative, compare the VTS150D.
The VT150D has a 50 litre vertical air receiver. A horizontal VTH arrangement can be discussed separately with the supplier.
Bambi specifies a maximum 50% duty cycle for the VT range. Confirm the actual operating profile and required output before purchase.
Follow Bambi’s current operator handbook and service schedule for the compressor and dryer. CJS Direct can advise on service and consumables for the ordered unit.
Yes. Ask CJS Direct to check flow at operating pressure, air quality, electrical supply, receiver obligations, installation access and servicing needs.